Electrovert Electra 600/F Wave Solder

Electrovert Electra 600/F Wave Solder {ID: 6169}

Status: Sold
DOM: 09/06
Condition: Superior to inline with its age
Quantity: 1
Transfer Direction: Left to Right

Go Back

Product installation requirements:

Facilities: 480V 3ph 60hz (82KVA)
Dimms: 150" x 65" x 72"

Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.


Configuration

  • Lead Free by design and use
  • Preheats: Top (Convection + IR) / Bottom: IR + Convection + Convection)
  •   * preheats can be reconfigured at buyer's request
  • Fingers: 2V + L (3mm) -> Good for pallets or PCBs
  • 24" Nozzles: UltraFill and Rotary Chip
  • Finger Cleaner
  • Motorized Width
  • Rear e-stops
  • ServoJet Spray Fluxer (internal)

Description

The ELECTROVERT Electra is an advanced, highly flexible wave soldering system designed for high-volume manufacturers. The proven performance of the platform delivers world-class soldering results while providing lead-free processing capability. 
 
The system is designed with closed-loop controls that provide accuracy and repeatability and an intuitive Windows operator interface that provides easy recipe set-up. Setup parameters can be entered while the operator views operations by sliding the control station along the front of the machine. VOC-Free fluxes are supported by the fluxer module and efficiently dried with the Vectaheat convection preheaters. The Electra is capable of handling lead-free applications with its cast iron solder pot and corrosive resistant components. A quick-change solder pot is available that allows the user to switch between different solder alloys, i.e. tin/lead to lead-free. The solder wave can be configured for air operation with the proven Lambda wave or for nitrogen operation.  For easy maintenance, lift-up hoods and a fold-down tailgate provide full front access to the machine


Specifications

Process Width:     2" to 24" (50 mm to 609 mm) opt. 
Machine Length:     150.5" (3823 mm) 
Machine Length with External Fluxer:     175.5" (4458 mm) 
Machine Width:     64.4" (1636 mm) 
Machine Height:     72" (1829 mm) 
Preheat Length:      6' (1.8 m) with internal fluxer   
I/R Preheat:     3 top side 
Vectaheat:     3 bottom side 
Wave Rotary chip:     standard 
Conveyor Automatic Width:     standard 
Finger Cleaner:     standard 
Exhaust requirements:     Three (3) 8" (208 mm) stacks: port 1 - 650 cfm; port 2 - 925 cfm; port 3 - 200 cfm 
Air requirements:    60 to 120 psig (415 to 830 kPa)


 

Disclaimer

Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.