FKN Systek K4000S Depanelizer

FKN Systek K4000S Depanelizer {ID: 6317}

Status: Sold
Condition: Like New Conditionin
Quantity: 1

Go Back

Product installation requirements:

Facilities:  HWD 17"x28"x15". (431x711x 381 mm) @ 90 lbs
Dims:  Universal 115V-220V.

Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.


  • Includes foot pedal switch
  • 18" Linear Blade 5" Circular


The K4000 motorized linear blade depanelizer is designed for flexible high volume singulation of scored and skip scored PCBs.  Simply place the scored section of the PCB onto the linear blade and step on the foot switch to bring the circular blade carriage across the top of the scoreline to split the panels. The top circular blade can be adjusted up and down to provide a cutting gap most suitable for the panel being singulated.Standard setting is to close the gap to the point where a piece of paper placed on the linear blade will cause the circular blade to rotate when traveling across the linear blade.

Adjustable right and left blade guards assure operator safety and can be set to only allow the blade to pass over the scoreline. The front support table can be set at a convenient height for optimal operator comfort.  Operating mode is switch selectable for speed ( 6 ips
or 12 ips) and for continuous or intermittent blade travel. In intermittent mode the blade will move as long as the operator holds down the foot switch.


Recommended Scoring Depth:   

  • > .012" < .027" 25° V Score
  • > 0.3 mm < 0.7mm

Placement of components to edge:

  • > .04" (1mm) for standard components
  • > .08" (2mm) for sensitive components (ie. ceramic chip capacitors.)



Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.