Electrovert Omni Excel 10 Reflow Oven

Electrovert Omni Excel 10 Reflow Oven {ID: 6366}

Status: Pending
DOM: 10/08
Condition: Superior to inline with its age
Quantity: 1
Transfer Direction: Left to Right

Request a Quote Go Back

Product installation requirements:

Facilities: 480V 3ph 60hz - 76KVA
Dimms: 259" x 56.3" x 49.8"

Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.


Configuration

  • 10 heated zone
  • auto chain oilers
  • SMEMA
  • Left to Right
  • Edge/Mesh
  • water cooled

Description

High-performance reflow soldering for demanding production requirements. From lead-free to hybrid processing, the OmniExcel series delivers nitrogen and power consumption efficiencies that set the standard for low cost of ownership.

OmniExcel = High Performance Reflow

OmniExcel’s Comprehensive Standard Features Include:

  • 10 heating zones with 3 cooling zones

  • Combination pin chain and mesh belt conveyor system

  • Recipe-driven, computer-controlled conveyor width adjustment

  • Closed-loop blower speed control (heating and cooling zones)

  • UPS battery backup system

  • SMEMA electrical interface

  • Input/Output board detection system

  • Programmable light tower

  • Exhaust failure detection system

User Interface

The OmniExcel is configured with a Windows®-based operating system that provides familiar pull-down menus. The standard, user-friendly software includes functional features, such as independent control of cooling blowers, nitrogen stand-by, data logging traceability, security password protection, calibration and system diagnostic capability.

Heating Technology

The OmniExcel “heat-on-intake” chamber design introduces a balanced air stream into the heating chamber. This method offers exceptional zone-to-zone segregation plus minimal peak temperature delta performance.

Lead-Free Process Ready

With higher peak temperature requirements and smaller process windows for lead-free soldering, a reflow system must minimize ΔTs and have the ability to control time above liquidus (TAL). The OmniExcel is ready to make the lead-free conversion simple with temperature process capability to 350ºC, high-efficiency heat transfer, and exceptional zone-to-zone segregation.

Flux Management

The OmniExcel’s patented Flux Extraction System™ (FES) contains harmful flux volatiles that are continuously released from the solder paste. FES modules are strategically placed to trap and filter particles throughout the entire heated chamber. Configured to maximize efficiency, FES units feature filter technologies such as micromesh screens, for collection of large particles, and/or packed stainless steel balls that create a wet filter for solvent collection. The filtered flux is captured in system-monitored containment vessels that are quickly and easily removed. The FES units also feature advanced, software-controlled, self-cleaning capability to extend maintenance intervals, maximize system efficiency, and reduce downtime. FES is the most comprehensive flux filtration system available today.

Closed-Loop Blower Control

Standard closed-loop blower con­trol balances airflow with minimal turbulence to improve heat transfer and substantially reduce power and nitrogen consumption.

VariCool™ Air Cooling Technology

The air cooling module offers inde­pendent, four-speed blower control via software, plus standard, closed-loop blower control with blower failure detection.

AutoOilers

The optional AutoOiler system provides regular lubrication of the conveyor system through simple software set points to ensure long conveyor life. Brushes lightly coat the rollers of the conveyor chain without contaminating the product support pins, resulting in vibration-free conveyor operation.


Specifications

Machine Length:   259″ (6573.8 mm)

Machine Width:   56.3″ (1430.4 mm)

Machine Height:   49.8″ (1265.4 mm)

Process Width:   20″ (508 mm)

Heated Length:   148″ (3759 mm)

Cooling Length:   50.5″ (1282 mm)

Operating Temperature:   350°C with rails

Compliance Requirement:   CE/UL listing


Disclaimer

Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.