Universal 4557D DPTF Tray Feeder

Universal 4557D DPTF Tray Feeder {ID: 6390}

Status: Sold
DOM: 2006
Condition: Superior to inline with its age
Quantity: 1

Go Back

Product installation requirements:

Facilities: provided by the platform machine
Dims: 21.63” x 47.50” x 60.25” @ 328 lbs

Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.


Universal’s Direct Pick Matrix Tray Feeder (DPTF) is a matrix tray feeder intended for use in manufacturing environments where the capacity of a Platform Tray Feeder (PTF) is not required, but the capacity demands are beyond the requirements of a Stationary or Stackable Matrix Tray Feeder. The DPTF features include:

  • Handle JEDEC and non-standard matrix trays
  • Experience no downtime associated with tray replenishment
  • Be portable and easy to setup
  • Reduce overall floor space requirements
  • Handle components that cannot sit flat on the PTF belt or are too large or tall

Inputs and Component Handling
The DPTF will deliver an entire pallet to the Platform machine. The pallet can handle 1 or 2 matrix trays, which may include the same or unique part types. The DPTF can operate in the following modes:

  • Exchange Mode: In Exchange mode, the operator can access and replenish trays in the inactive magazine without stopping the Platform machine or the DPTF.
  • Concurrent Mode: In Concurrent mode, both magazines can operate as one large magazine to maximize the number of parts and part numbers that can be delivered by the DPTF.
  • Job Mode: In Job mode, the inactive magazine can be filled with parts for another job while the active magazine continues to deliver parts to the Platform machine during the current job.

Required Platform Configuration
The required base machine configuration for DPTF integration:

  • Support for GSM1, GSM2, Genesis, AdVantisX, or AdVantis B block (or later) machines only
  • Platform software is installed
  • PrecisionPro feeder interface required
  • For rear mounting locations, the feeder bank must be in the outbound position
  • The DPTF can be mounted on fixed feeder banks (recommended) or removable feeder banks. If mounting on removable banks, the removable bank side plates must be removed
  • Mounting positions: Bank 1 and/or bank 3 depending on base machine type and configuration
  • Support for Magellan and/or analog cameras
  • Not supported on machines equipped with Lightning heads



Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.