Cencorp 1000 BR High speed In-Line Router

Cencorp 1000 BR High speed In-Line Router {ID: 7437}

Status: Sold
DOM: 2007
Condition: Superior to inline with its age
Quantity: 1

Go Back

Product installation requirements:


  • Native: 400VAC 3ph 50Hz 14A
  • Transformer: 208V 3ph 60Hz 6KVA
  • Air: 5-7 bar, 100l/min

Dims: 992 x 1560 x 1744 (wdh) in mm @ 1700kg

Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.


  • Dual Flat Belt Exits

  • Vision for Fiducial Recognition

  • External Vacuum (Cencorp PN: 16000303)

  • Transformer (208V input / 400V output)


The best choice for PCB

The PCB depaneling phase should never be a bottleneck in your production, not in terms of quality, cycle time, change-over time or maintenance.  Then the right choice is the Cencorp 1000 Bottom Router (BR), chosen by world-class manufacturers

to improve their production throughput. Over 15 years of experience in depaneling has been built into this 4th generation solution.

Cencorp 1000 BR provides flexibility and efficiency

The system is extremely easy to program and operate thanks to its graphical user interface with integrated teach mode. Automated tasks such as automatic rail adjust and automatic program change as well as the servo gripper mechanism eliminate the need for any manual intervention or the need to use special tools in product change-over.  The Cencorp 1000 BR is both efficient and flexible; the same machine can also be used as a standalone router. Due to the high capacity and short change-over time, you can replace several standalone machines with one Cencorp 1000 BR.


Pick & Place Work Envelope

  • X-travel: 645 mm
  • Y-travel: 940 mm
  • Z-travel: 150 mm
  • W-travel: 360 deg

Router Work Envelope

  • X-travel: 450 mm
  • Y-travel: 415 mm
  • Z-travel: 50 mm


  • Repeatability (x,y,z): ±0.03 mm [3 s]
  • Repeatability (W): ±0.05 o [3 s]

Pick & Place Performance

  • Max. axis speed: 2000 mm/s
  • Max. acceleration: 15000 mm/s2
  • Rec. routing speed: 20-50 mm/sec
  • Machine cycle time, min*: 4 sec

Board Handling (panel)

  • Min PCB size: 50x50 mm
  • Max PCB size: 450x350 mm
  • Thickness, max: 5mm
  • Transfer protocol: SMEMA
  • Optional: WMV
  • Transfer height: 900+-25mm
  • PCB conveyor type: Two segment
  • Top clearance: 70 mm
  • Bottom clearance: 20mm
  • Conveyor speed up to: 16m/min adjustable
  • Width adjustment**: Programmable
  • Locking pins adj.: Programmable
  • PCB stopper pos.: Programmable

Base Standards

  • Teach In (CATS): Camera assist
  • Broken bit detection: Optical
  • Routing bit storage: 10+10 pcs
  • Dust extraction support: Air ionisation

Gripper System

  • PCB pick & place: Servo gripper
  • Gripper finger width: Programmable
  • Gripper finger change: Automatic
  • Gripping identification: Standard
  • Tool rack f. gripper finger: 3-4 positions
  • Pneum. multiple gripper: Optional

External Vacuum System

  • ULT 200 Ee: Optional
  • DustAway: Optional
  • Others: Optional
  • Dust Flow Control: Optional

Graphical User Interface

  • Operating system: Windows XP
  • USB memory: Standard
  • Touch screen: Optional
  • Ethernet card: Standard
  • Dual Monitors: Optional

Machine Vision

  • CATS: Standard
  • Active vision, Matrox: Optional
  • Fiducial reg.time: < 1 s

Software Options

  • CMS: Local SPC
  • APCC: Auto Prg. Change
  • Barcode support: lD or 2D

Machine Dimensions

  • Width: 992 mm
  • Depth: 1560 mm
  • Height: 1744 mm
  • Weight: 1700 kg

Electrical Service Requirements

  • Voltage EU (USA): 400 (208) VAC 10°/o
  • Frequency EU (USA): 50 (60) Hz
  • Branch circuit size: 16 A
  • Average power cons.: 2 kVA

Pneumatics Service Requirements

  • Pressure: 5-7 bar
  • ±10%, dry clean air
  • Approx. air consumption: 100 I/min

Environmental Requirements

  • Operating temperature: 10 ... 40°C
  • Operating humidity (RH): 30% ... 85%


Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.