Cencorp 1000 SR High Speed Router

Cencorp 1000 SR High Speed Router {ID: 7438}

Status: Available
DOM: 12/2006
Condition: Inline with its age
Quantity: 1

Request a Quote Go Back

Product installation requirements:

Facilities: 208V 3ph 20Amps
Dims: 42" x 61" x 69"

Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.


Configuration

  • Single Table
  • Teaching Camera
  • Servo-Z

Description

The Cencorp 100 SR Stand-Alone Depaneling System define precision and control.  Precision is engineering into this flexible depaneling platform with:

  • Precision-machine base and servo gantry
  • Modular concpt allowing configuration to meet customer needs
  • Router or saw cutting device (option) accomodates v-scored or pre-routed panels.
  • Easy tool change with automation fixture validation (option) address high mix envornments.
  • Quality that no other depaneling method matches for low stress and accurate PCB singluation.

Featuring:

  • load and unload station presents the product at a 45 degree angle
  • Conductive start switches
  • Automatic sliding doors
  • Noise suppression
  • Touch screen user interface

Specifications

Dimensions

  • Length : 60.2 in . ( 1530 mm)
  • Width : 39.4 in . (1000 mm)
  • Height: 64.6 in. ( 1640 mm)
  • Approx. Weight: 2800 lb (1270 kilos)

Gantry

  • Gantry Motors: 3-4 Axis ( 5-saw) AC brushless servo motors
  • Servo Repeatability: ±0.0005 in. (0.0127 mm)
  • Configuration X-Y-Z (Router). Theta - optional (Saw)

Board Handeling

  • Max. Panel Size: 17.27" x 17.27" (450 mm x 450 mm)
  • Panel Thickness:
    • 33mm Spindle: 0.9" (2.3mm) max.
    • 42/45mm Spindle: Upto 0.375" (9.5mm)
  • Max. Component Height:
    • 0.375" (9.5 mm) tup (router) side
    • 2 inch (50.8 mm) bottum (tooling) side
  • Load Height: 31.5 / 35" (800 / 900mm)
  • Load Angle: 45 degree

Utilities

  • Voltage: 208-220V, Three phase, 60 Hz, 25amps / 380-400V, Three phase, 50Hz, 20amps
  • Pressure:: 80 PSI (5.5 Bar) clean dry air
  • Flow: 85 L/min (3 SCFM)

Vacuum System

  • Power: 5 HP (3.7 kW rotary vane blower)
  • Filtration : 3 stage disposable industrial vacuum filter bag, 0.3 micron (HEPA) filter

Spindle Motor

  • Power: 33mm ball-bearing spindle
  • Max. Speed: Variable up to 50,000 RPM
  • Cooling: Air cooled
  • Router Bit: Shank size 3.17mm ( 1/8")
  • Tool Change: Manual / Automatic option
  • Rout Speed: Up to 75mm (3" ) per second
  • Slew Speed: Up to 863 mm {34") per second
  • Optional: Heavy duty spindle

Saw Motor (option)

  • Power: DC brush servo maximum 250 watts
  • Max. Speed: 10,000 RPM
  • Cooling: Air cooled
  • Blade Diameter: 76.2mm (3")
  • Arbor Diameter: 25.4mm (1") or 20mm (0.8 in)
  • Tool Change: Manual
  • Rout Speed: Up to 203mm (8") per second
  • Slew Speed: Up to 863 mm (3") per second
  • Secondary Vacuum System: bottom side

Control

  • Cencorp 1000 SR contol software, Industrial cornputer specification:
    • Windows XP, Pentium Processor
    • Flat Panel Monitor
    • Touch Screen GUI
    • I parallel port, 2 serial ports, USB port, 1 network port
    • CD-ROM drive
    • 3.5 Floppy ( 1.44MB)

Programming

  • Camera Assisted Teaching System (CATS)
  • Program Teach Mode:
    • Coordinates are taught by physically moving the motors to the specific coordinates . "Teaching" the machine the position.
  • Program Test Mode:
    • Manually or automatically step through program to verify the program before running production.

Software Features

  • Event Log
  • Diagnostic Tools
  • Tool Life Tracking
  • Vacuum Bag Life Tracking
  • Multi-Level Password Protection

Standard Features

  • Flat Panel Monitor Touch Screen GUI
  • Heavy Duty Multi-Axis Servo Gantry
  • Ergonomic Operator Load/Unload
  • Automatic Access Doors
  • Precision Router Spindle
  • Dust Extraction Collection System
  • CE Certification

Available Options

  • Dual Pallet
  • Saw Module
  • Active Vision
  • Broken Bit / Blade Detection
  • Automatic Bit Change
  • Automatic Fixture Validation
  • Online Tooling
  • Online Programming
  • Linear Encoders
  • Anti-Static Lexan

Disclaimer

Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.