Simplimatic 2262 Shuttle Gate

Simplimatic 2262 Shuttle Gate {ID: 7453}

Status: Sold
DOM: 2007
Condition: Superior to inline with its age
Quantity: 1
Transfer Direction: Either
Max PCB Width: 18"
Length : 36"

Go Back

Product installation requirements:

Facilities: 115V 60hz 10A
Dims: 36" x 30" x 40" @ 400 lbs

Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.


Standard Features
• Closed-loop servo shuttle system
• High-speed DC stepper motor conveyor
• ESD belts
• Hand crank width adjust
• Triple-redundant safety system
• Creates up to a 42-inch (106.7cm) opening
Model 2262 Shuttle Gate allows product to be conveyed across an opening in a production line. This allows operators to pass between machines in a line instead of walking around the end of the line. The shuttle remains retracted until a board is ready to transfer. Average cycle time is seven seconds.
Typical applications include:
- Creating line openings so operators have better access to the factory and production machines
- Allowing for the movement of carts, pallet jacks, or cleaning equipment
Additional Benefits
• Optional servo-controlled shuttle mechanism does not rely on positional sensors or hard stops. Instead, the retract and extend positions are easily stored in the software and the closed-loop system ensures they are recalled exactly, every time.
• Zero-clearance edge guides eliminate the danger of boards becoming jammed under the edge guide.
• Shuttle will extend slowly and retract very quickly, which increases safety while reducing cycle times.
• Pressure sensors on the shuttle, an infrared sensor, and current limit settings protect operators from the shuttle action.
• Standard Allen-Bradley controller system supports a touch screen interface and can be expanded to include network capability.


Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.