Condition: Superior to inline with its age
Transfer Direction: Left to Right
Belt Sections: 1
Max PCB Width: 16"
Length : 32"
Product installation requirements:
Requirements: 115VAC, 1ph, 6A / 80 PSI, 3CFM
Dimensions: 32" x 51" x 54"
This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance. Availability is subject to prior sale.
The Model 3140 Bare Board Loader is designed for introducing unpopulated boards into a high volume, low mix environment. Its high capacity storage bin (20" stack) allows the unit to run unattended for long periods of time. The pneumatic lift design also works well with large board applications or thin boards. Each unit can automatically halt its operation so that other boards may pass through. Average cycle time is seven seconds.
SMEMA: 1.2 Compliant
Circuit Board Length: 3" (76.2mm) to 20" (508mm)
Circuit Board Width: 2" (50.8mm) to 18" (457.2mm)
Circuit Board Thickness: 0.010" (0.254mm) to 0.125" (3.175mm)
Allowable Warpage/Sag: 0.007 inch per inch, .125" max.
Edge Clearance: Requires a clear area of 5mm (0.197") on the front and rear edges of the bottom surface of the board (3mm optional)
Component Clearance: 2" (50mm) above and below the conveying surface
Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.