Heller 1809 MKIII Reflow Oven

Heller 1809 MKIII Reflow Oven {ID: 7602}

Status: Available
DOM: May 2015
Condition: Inline with its age
Quantity: 1
Usage : 22k hours
Transfer Direction: Left to Right
Max PCB Width: 18"
Length : 183"

Request a Quote Go Back

Product installation requirements:

Facilities: 480V 100A 3ph 50/60hz
Dims: 183" x 56" x 63" @ 4,350 lbs


Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.


  • 9 heated zones
  • left to right, front fixed, edge/mesh
  • Chain Oilers


Heller's workhorse providing consistent performance for high volume requirements while minimizing P.M. and floorspace.

Advancements like the invention of the first waterless / filterless flux separation system earned Heller the prestigious Vision Award for Innovation in soldering. But more importantly, this development extended preventative maintenance intervals from weeks to months.

Now, the latest breakthroughs associated with the MK III reflow system provide even lower cost-of-ownership for our customers. The new heating and cooling technologies deliver up to 40% reduction in nitrogen and electrical consumption. This makes the MK III system not only the premier soldering system but the best overall value in the industry!

  • New Frame. More than simply beautiful, this new frame utilizes twice the insulation. This reduces heat loss and saves up to 40% on electricity costs!
  • Process Control greater impact than our competitors. Powered by ECD, this innovative software package provides three levels of process control from Oven CpK, to Process CpK and Product Traceability, this software ensures that all parameters are optimized and SPC reporting is fast and easy.
  • Ultra-Parallel Conveyor System. Four (4) lead screws ensures the tightest tolerances and parallelism — even on boards with 3mm clearance at the edges!

  • Enhanced Heater Modules. Enhanced heater modules “blanket” the PCB with heat for the lowest Delta Ts on the toughest boards! Additionally, the Uniform Gas Management system eliminates “net flow” which results in nitrogen consumption reductions of up to 40%!

  • A Heller Exclusive! Heller’s 10” (250mm) long heater modules are 2” (50mm) narrower than our competitors so we can provide more modules than anyone in the industry! More modules means more process control and a 17% lower liquid time for the tightest tolerances of all!

  • Fastest Cooling Rates The new blow thru cooling module provides cool rates of >3 deg C/Sec — even on LGA 775! That rate meets even the most demanding Lead Free Profile requirements!

  • New Flux System Virtually Eliminates Maintenance This new fl ux collection system traps the flux in a separate collection box with easy to remove plates. As a result, the oven tunnel is kept clean — thus saving time consuming P.M. A collection jar captures the flux and can be removed while the oven is running for the ultimate in time savings!


Electric Supply


Power Input (3 Phase) Standard

480 volts

Breaker Size

100 amps @ 480v


7.5 - 16 Continuous

Typical Run Current

30 - 35 amps @ 480v

Optional Power Inputs Available

208/240/380/400/415 VAC


50/60 Hz

Sequential Zone Turn On




Overall Oven Dimensions

183" (465cm) L  x 56” (142cm) W  x 63” (160cm) H

Typical Net Weight

4350 lbs. (1970 kg)

Typical Shipping Weight

5500 lbs. (2490 kg)

Typical Shipping Dimension

195” x 73” x 81”

Computer Control


AMD or Intel Based Computer


Flat Screen Monitor w/Mount


Auto Start Software


Data Logging


Password Protection


LAN Networking


Additional Features


KIC Profiling Software


Signal Light Tower


Powered Hood Lift


Five (5)Thermocouple Profiling


Mesh Belt Conveyor


Height From Floor

35.5" 2.0" (90 cm 5 cm)

Maximum PCB Width

18" (46 cm)

Space Required Between PCB's

0.0" (0.0 cm)

Conveyor Length On-Load

18" (46 cm) 

Conveyor Length Off-Load

18" (46 cm) 

Heated Tunnel Length

105"  (254 cm)

Process Clearance Above Mesh Belt

2.3" (5.8 cm)

Mesh Belt Pitch

0.5" (1.27 cm)

Maximum Conveyor Speed

74"/Min (188 cm/min.)

Conveyor Direction Left to Right


Conveyor Speed Control

Closed Loop

Edge Hold Conveyor System Option


Height from Floor – Standard

37.0" 2.0" (94 cm 5 cm)

Clearance Above & Below Conveyor Pins

1.15" (2.9 cm)

Length of PCB Support Pins

.187" (4.75 mm)

Minimum/Maximum  Board Width

2.0" – 18" (5 – 46 cm)

Power Width Adjustment


Computer Controlled Width Adjust


Auto Lubrication System


Forced Convection Zones


Top & Bottom


Heater Type

Instant response open coil

Heater Material


Profile Change Time

5 – 15 minutes

Temperature Control


Accuracy of Temperature Controller


Cross-Belt Temperature Tolerance


Heater Wattage Per Zone

6000 w

Temperature Range Standard


High Temperature Up to 450°C


Cooling Systems


Number of Cooling Zones Standard


Additional Cooling Zones


Water Cooling



Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.