ASC VisionPro AP500 3D Solder Paste Inspection

ASC VisionPro AP500 3D Solder Paste Inspection {ID: 7604}

Status: Available
DOM: 2014
Condition: Superior to inline with its age
Quantity: 1

Request a Quote Go Back

Product installation requirements:

Facilities: 110VAC, 1ph
Dims: Table top, 17" wide x 30" deep @ 80lbs

Product Terms:

This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance.  Availability is subject to prior sale.




VisionPro AP500

VisionPro AP500, the most popular model of ASC International’s VisionPro AP family, is a sophisticated 3-dimensional solder paste measurement system coupled with an intuitive Windows user interface, and packaged in a rugged, bench-top system designed for the electronics production floor. With only a few minutes training, an operator can perform accurate 3D measurements of solder paste pads, BGA's and many other PCB features. VisionPro AP500’s completely automatic solder paste measurement process eliminates operator errors and offers excellent measurement repeatability.

Simple to Use Interface

With ASC International’s new ASCan Ultra measurement software, creating a fully automated inspection routine can now be completed in less than 10 minutes. In Run mode, the user loads the program, confirms fiducial alignment and the ASCan Ultra software automatically measures the Gerber imported programmed locations with a final “PASS” or “FAIL” message. A defect error review mode allows users to verify “Failed” locations and attach corrective action items for traceability.

Advanced Statistical Analysis

VisionPro AP’s ASCan Ultra measurement software includes on-board SPC analytics, a powerful tool to help operators control important parameters of the stencil printing process. Data collected by the system for each desired characteristic is calculated and charted in real-time. User-defined LSL, Target and USL • X-bar / R and histogram charting • Min / Max/ Median Values • Cp/Cpk /Cr and Lower Z values are all part of the advanced statistical analysis software.

Key Features & Benefits

  • Multiple Sensor Options: SP3D & PSI
  • Automated Height, Area,Volume, Offset
  • Gerber Programming & Auto-Scripting
  • Defect Error Review
  • Built-in Data and SPC Charting
  • Color 3D Profiles of Measured Features
  • ASCan Ultra Measurement Software
  • Dell PC and Windows 7 /10 OS
  • 20″ x 20″ Board Support 
  • 12″ x 20″ Max Board Inspection Area
  • NIST Traceable Standard
  • Hardware/Software Reference and Online Help


General System Specifications


Inspection Speed

.33 Sec./FOV

Height Accuracy

1µm (0.04 mils)

Gauge R&R

<<10% (+/- 40% Tolerance)

Z Resolution

 .48 µm (.019 mils)

Lateral Resolution (X-Y)

6.8µm (.27 mils)

Minimum Paste Deposit

51µm (2 mils)


Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.