DOM: Oct 2007
Condition: Inline with its age
Product installation requirements:
Facilities: 480VAC 60Hz 60A FLA 34A 2 phase
Dims: Core unit: 70" x 40" x 80" (lwh) @ 1300 lbs
This unit is located in the CEE facility in the Chicago area. A CEE technician will demonstrate the unit fully functional either live or by video for your acceptance. Availability is subject to prior sale.
The MPS C Series Desmear/Etchback Systems are designed to remove resin smear from single, double, and multi-layer printed circuit boards, or any other product requiring surface treatment. MPS’s method is a dry process involving gases rather than liquids to treat products. The gases are excited to a plasma state by a RF generator, producing free radicals and ions. The resulting chemical reaction changes the resin smear into ash which is then removed by the continuous flow of gases during the remaining plasma treatment. Additional removal of contaminants from the waste gases can be accomplished by simple scrubber units. At no time during the plasma desmear/etchback process is the operator exposed to toxic hazards or harmful RF emissions. Plasma desmear/etchback also does not present the waste disposal problems inherent in chemical desmear/etchback systems.
|Max. Height (in/cm)||80/203|
|Floor Space (sq.ft./m2)||53/4.92|
|Voltage (V) 3 Phase||208 (380/480 V Optional)|
|Current (A)||30 (60 Optional)|
|Frequency (Hz)||60 (50 Hz Optional)|
|Compressed Air (psi)||60-100 (4.2-7bar/kg/cm2 - See air spec.)|
|Gas Fittings||Copper/brass (Stainless Steel Optional)|
|Sound Level (approx.)||45dB|
|Gases Required||N2, O, plus up to 5 process gases|
|Exhaust Connection||2 in. (5 cm) PVC|
|RF Generator (kw)||2.5 (5.0 Optional)|
|Vacuum Pump (cfm) (m3/min.)||55 (1.54)|
|Vacuum Blower (cfm) (m3/min.)||245 Optional (6.68)|
Information is provided for your convenience as our good faith estimate for this equipment. CEE does not warrant the accuracy of this information due to the nature of used equipment. Used equipment can be customized, altered, or simply worn beyond the capability to perform to original specifications. If certain details are critical for your application, we highly recommend testing the machines performance on that criteria. Please notify your CEE sales representative prior to purchase and we will propose solutions for your concerns. CEE's goal is always to minimize your risk.